GEOLUXE® Dionysos Pyrolithic

GEOLUXE® Dionysos Pyrolithic is a large-format porcelain slab from the Asian premium manufacturer GEOLUXE with a bright marble feel and calm, finely flowing cloud and stripe structures. In design terms the slab quotes the classic Dionysos marble from the Pentelikon mountains in Greece and is laid out for a calm, almost textile-fine brightness. At ROSSITTIS we work it into heat- and acid-resistant kitchen worktops, vanity units, wall cladding, furniture tops and made-to-measure interior and exterior components including façades.

Sinterkeramische Großtafel (Sintered Stone) der Marke GEOLUXE (Wing Tai Group, Philippinen) – kein gewachsener Naturstein, kein Quarzkomposit und kein klassisches Porzellan. „Pyrolithic Stone" ist die Eigenmarketing-Bezeichnung für die hochtemperatur-gesinterten Mineraltafeln. Variante „Dionysos" als gestalterisches Zitat des griechischen Dionysos-Pentelikon-Marmors mit ruhiger, fein-fließender Wolkenoptik in hellweißem Cremeton.

Engineered quartz

Available as: Slabs

Check the live stock Request an appointment

About GEOLUXE® Dionysos Pyrolithic

Background. GEOLUXE® is an Asian premium brand for large-format porcelain slabs (sintered stone), produced by the Philippine Wing Tai group. Unlike the European market leaders Laminam (Italy), Neolith (Spain), Dekton (Spain/Cosentino) and SapienStone (Italy), GEOLUXE has positioned itself since its market launch in 2018 above all through the design depth of the slab look and through the format. The brand markets its slabs under the term “Pyrolithic Stone” – its own marketing designation for high-temperature-sintered mineral slabs based on natural clays, feldspar aggregates and mineral pigments.

Material composition and manufacture. A GEOLUXE Pyrolithic slab consists of around 100 % mineral raw materials – feldspar, quartz, clay minerals and pigments – without polymer binders. The mixture is compacted in a mould by a roller-press or pressing process, provided with decorated pigment layers for the vein and cloud pattern and then sintered at temperatures above 1,200 °C in a tunnel kiln. In this sintering the mineral particles partly fuse into a closed crystalline mineral structure – the end product is a fully mineral, sintered-through slab with no resin content. This yields decisive technical advantages over engineered quartz: water absorption below 0.1 %, very high heat resistance (pots can be set down directly), full UV resistance and thus suitability for external use, frost resistance and almost complete acid resistance (including concentrated acids).

The Dionysos Pyrolithic variant. In design terms the grade quotes the world-famous Dionysos marble from the Pentelikon mountains north-east of Athens – a white, finely crystalline calcite marble with restrained light-grey cloud bands, used since antiquity (among other things for the Acropolis in Athens) and listed in the modern natural stone trade as “Dionysos Pentelikon”. The GEOLUXE slab transfers this calm, finely flowing cloud and stripe look into porcelain with a bright, slightly warm-toned cream-white ground tone – without vein tips, without hard contrasts, with an almost textile-fine play of light across the surface. The individual slabs show slight variations but remain visually calculable within the grade.

Format and thicknesses. GEOLUXE supplies the Pyrolithic slabs in several large formats – the standard format is around 320 × 160 cm, the maxi format around 320 × 160 cm and 160 × 80 cm. The thicknesses are clearly graded at 6, 12, 20 and 30 mm; the large slab in 12 mm in particular has established itself for interior façades, wall cladding and furniture, while for kitchen worktops and bar counters the 12 or 20 mm variant (with a double edge / “mitre edge” for a visibly thicker look) is standard.

Interior application. Dionysos Pyrolithic is the first choice for kitchen worktops in which a bright, calm marble feel is wanted without accepting the acid sensitivity of a natural marble. It is also outstandingly suited to vanity units, wall cladding, bathroom walls, furniture tops (dining tables, coffee tables), reception desks and large-format interior floors. The slab is heat-resistant (hot pots can be set down briefly), pore-free (no sealing required) and acid-resistant (wine, lemon and tomato leave no etch marks).

External application. Here lies the real technical advantage over engineered quartz: porcelain is UV-stable, frost- and weatherproof and can be used as a back-ventilated façade panel, external wall cladding, pool surround and outdoor kitchen worktop. The GEOLUXE Pyrolithic line is explicitly released for such applications.

ROSSITTIS range. The surface finishes currently in stock are listed in the »Finishes« block further down. From them we fabricate kitchen worktops (standard and island with a mitre edge), vanity tops, wall cladding, bar counters, buffet and furniture tops, interior stairs, window sills and façade elements.

Comparison. Against genuine Dionysos Pentelikon marble, the porcelain remains acid-resistant, heat-resistant, frost- and UV-proof – the natural marble is livelier and more individual, but more sensitive in care and loading. Against engineered quartz (Caesarstone, Silestone, Compac) the slab is more heat-resistant (hot pots can be set down directly) and fully UV-stable (suitable for external use), but somewhat cooler and more brittle to the touch. Against Laminam and Neolith, GEOLUXE is technically on a comparable level – the choice of brand is governed primarily by availability, delivery times, design portfolio and warranty conditions.

Honest assessment. Dionysos Pyrolithic is a technically very clean, compositionally calm choice for modern, bright interior and exterior applications with a marble feel. Anyone looking for a lively play of natural veins with genuine geological depth should stay with natural marble; anyone needing a calculable, heat- and acid-resistant, UV-stable large slab has a very distinctive solution here at the interface between natural stone feel and industrial reliability.

Suitability by application

Particularly suited to

Küche & Arbeitsplatten ✓ Ideal
Bodenbelag ✓ Ideal

Suitable with limitations

Außenbereich △ Limited

Finishes

GEOLUXE® Dionysos Pyrolithic is available in a range of finishes. The finish affects appearance, feel and the care it needs.

Poliert

Glänzende Oberfläche mit höchstmöglichem Maß an Farbintensität — die Standard-Veredelung im Kunststein-/Quarzkomposit-Segment. Pflegeleicht im Alltag, säurebeständig gegenüber haushaltsüblichen Substanzen. Eine repräsentative Wahl für Küchenarbeitsplatten, Wandverkleidungen und Sichtflächen mit klassischer Hochglanz-Anmutung.

Care & fabrication

Cleaning. In everyday use, warm water, a soft cloth or a clean mop and a neutral to mildly alkaline pH cleaner are sufficient. Mild all-purpose cleaners, mild washing-up foam and all commercially available sanitary and kitchen cleaners without hydrofluoric acid (HF) are suitable. The porcelain is almost completely acid-resistant – even vinegar, citric and hydrochloric acid practically do not attack the slab. Take up spills promptly, because on the bright surface shadows are visually apparent at once; the material itself, however, is pore-free and therefore stain-proof.

Do not use. Hydrofluoric acid (HF) and fluoride-containing cleaners are the only class of substance that can genuinely attack porcelain – they occur practically only in industrial glass and stone cleaners and are not relevant in the household. Even though the slab is hard: steel wool and strongly abrasive pads can cause the finest dulling on the polished variant.

Sealing. Not required – porcelain is dense and pore-free in itself, and water absorption is below 0.1 %. A sealer would tend to show up on the surface as a veil and is superfluous.

Kitchen. In kitchen use, Dionysos Pyrolithic is technically almost unbeatable: hot pots can be set down directly for a short time (the slab is unaffected well beyond 200 °C), acids such as vinegar, wine, lemon and tomato leave no traces, and the polyester-resin trouble with cut marks does not arise, because there is no polyester resin. Even so, we recommend chopping boards (knife blades blunt more quickly on the hard slab) and trivets when cooking as standard practice.

Bathroom. In the bathroom the slab is fully usable as a vanity unit, wall cladding, bath surround and shower. Anti-limescale sprays and all commercially available sanitary cleaners are approved. In the shower area, wipe off standing water promptly so that a limescale film does not build up – on the bright slab, limescale rings are visible as lighter shadows.

Outdoors and frost. Fully suitable. The slab is UV-stable, frost- and weather-resistant and can be used as a back-ventilated façade panel, external wall cladding, pool surround and outdoor kitchen worktop. The surface finishes currently in stock are listed in the »Finishes« block further down.

Scratches and repair. Porcelain is very hard (around Mohs 7) and therefore considerably more scratch-resistant than most natural materials. Deeper damage cannot simply be re-polished – repair is carried out by replacing the affected workpiece. Particular care with edges and cut-outs is therefore required during fabrication; mitre joints should be executed by experienced specialist firms with special adhesive and precise workshop preparation.

Frequently asked questions

What kind of material is GEOLUXE® Dionysos Pyrolithic?

It is a large-format porcelain slab (sintered stone) from the Philippine premium brand GEOLUXE. Mineral raw materials (feldspar, quartz, clay minerals, pigments) are compacted without polymer binders in a pressing process and sintered at over 1,200 °C in a tunnel kiln. “Pyrolithic Stone” is GEOLUXE's own marketing designation for this material class.

What does the name “Dionysos” refer to?

The name refers to the world-famous Dionysos Pentelikon marble from the Pentelikon mountains north-east of Athens – a white calcite marble with calm light-grey cloud bands, used since antiquity for the Acropolis and for classical sculpture. The GEOLUXE slab quotes its calm, finely flowing look in industrial porcelain.

How does porcelain differ from engineered quartz (Caesarstone, Silestone)?

Engineered quartz contains roughly 7–10 % polyester resin as a binder; porcelain is entirely mineral with no resin content. This gives porcelain three important advantages: higher heat resistance (hot pots can be set down directly), full UV resistance (suitable for external use) and almost complete acid resistance. Engineered quartz, on the other hand, remains warmer to the touch and less brittle at the edge joint.

What slab formats and thicknesses does GEOLUXE offer?

Standard formats are around 320 × 160 cm and 160 × 80 cm, in thicknesses of 6, 12, 20 and 30 mm. For kitchen worktops and bar counters 12 or 20 mm is standard, frequently with a mitred edge joint for a visibly thicker look. For wall cladding and façades the thinner thicknesses (6–12 mm) are established.

Is Dionysos Pyrolithic suitable for kitchen worktops?

Yes – without restriction. Acids (wine, lemon, tomato, vinegar) leave no traces, hot pots can be set down directly for a short time (tolerant above 200 °C), the slab is pore-free and very scratch-resistant. Chopping boards are nevertheless sensible – knife blades blunt more quickly on the hard slab.

Is the slab suitable for external surfaces, façades and pool surrounds?

Yes – that is one of the central advantages over engineered quartz. Porcelain is UV-stable, frost- and weather-resistant and can be used as a back-ventilated façade panel, external wall cladding, pool surround and outdoor kitchen worktop. On external surfaces we recommend the honed or satin-honed variant.

Which cleaners may I use?

Permitted are warm water, all neutral, alkaline or mildly acidic cleaners, mild all-purpose cleaners and all commercially available sanitary and kitchen cleaners. The slab is almost completely acid-resistant. Out of the question are only hydrofluoric acid (HF) and fluoride-containing cleaners – these are not relevant in the household.

How do I repair scratches and damage?

Porcelain is very hard and scratch-resistant, but it cannot simply be re-polished like engineered quartz. With deeper damage, repair is carried out by replacing the affected workpiece. Particular care with edges and cut-outs is therefore required during fabrication; mitre joints should be executed by experienced specialist firms with special adhesive.