Migmatit

Listed in our range under Granite.

Juparana India

Juparana India is an Indian migmatite from Doddamudvadi/Kanakapura in Karnataka, with a warm creamy-beige ground mass interspersed with pink-salmon feldspar accents and black biotite bands in a flowing migmatitic direction of movement. Also listed internationally as Indian Juparana and Pink Coral; used for kitchen worktops, bar counters, floor surfaces, wall cladding, external façades and prestige interior and exterior surfaces with a warm, elegant feel.

Juparana India is petrographically a Precambrian migmatite from Doddamudvadi/Kanakapura/Karnataka (DNSA #1760), but is listed in the trade as granite.

Migmatit India Frostbeständig Säurebeständig 2.630 kg/m³

Available as: Slabs, Skirting, Paving slabs, Tiles and flooring slabs

Check the live stock Request an appointment

About Juparana India

Juparana India lives from a warm, elegant material effect with a characteristically flowing migmatitic banded structure — the trade name 'Juparana' describes a whole family of commercially widespread migmatitic stones with a creamy ground mass and a dynamic vein pattern. The ground tone is a warm cream beige to salmon pink, interspersed with subtle warm pink feldspar accents — this pink note has earned the stone its second trade name, 'Pink Coral'. Across the slab surface run black to anthracite biotite bands in flowing, diagonally curved movements that give the composition a clear direction of movement. Added to this are fine-grained light grey and white quartz and feldspar speckles, which give the surface depth and a play of light. On a polished surface the stone develops a warm, glowing depth effect with the characteristic 'flowing' Juparana character — a material for architecture that wants to combine warm natural elegance with a dynamic material effect.

Geologically, Juparana India is a Precambrian migmatite from the quarries around Doddamudvadi near Kanakapura in the southern Indian state of Karnataka — DNSA-confirmed under entry #1760 (INDIAN JUPARANA, INSK 43.24). The DNSA classifies the rock unambiguously as a metamorphic migmatite. Migmatites are highly metamorphic mixed rocks on the boundary between gneiss and incipient anatexis (partial melting) — during the Precambrian mountain building, at pressures and temperatures above 700 °C, the light constituents (feldspar, quartz) in the rock began to melt while the dark minerals (biotite, hornblende) remained solid. On cooling, the light melt paths solidified in flowing, often very expressive bands — precisely the flowing banded structure that gives Juparana India its character. In international trade the stone is listed in the granite family and marketed under several synonyms: Juparana India, Indian Juparana and Pink Coral. At ROSSITTIS we classify the material as granite, as is customary in the trade. Important for identification: further Indian stones with a 'Juparana' reference exist — Juparana Colombo (DNSA #5107, Tamil Nadu) and Vyara Light (DNSA #4656, Tamil Nadu) belong to the wider Juparana trade family but are independent stones from other quarries with different properties, not identical with Juparana India.

Technically, Juparana India shows solid values for an Indian migmatite. The bulk density is 2,630 kg/m³, the compressive strength 135 MPa, the flexural strength 7.4 MPa and the water absorption a very low 0.18 %. Mohs hardness is 6-7. DNSA explicitly confirms frost resistance, acid resistance and the outdoor durability of the polish — a particularly valuable property that many other stones do not meet. Wine, lemon juice, vinegar or acidic sanitary cleaners leave no etch marks. DNSA rates the stone as 'used now and again' in Germany — it is one of the more widespread Indian migmatite trade stones in the German-speaking market.

At ROSSITTIS we carry Juparana India as a raw slab for kitchen and bathroom worktops, bar counters, wall cladding, fireplace surrounds and prestige statement surfaces, in tiles for floor and wall applications, as tread and riser for stairs as well as window sill, skirting, fountain element, pool coping and for project-specific cut-to-size. The stone is also excellently suited to external façades and external terraces — the DNSA-confirmed outdoor durability of the polish even permits polished external surfaces without loss of gloss. The surface finishes currently in stock are listed in the »Finishes« block further down.

Compared with the classic Brazilian Juparana (e.g. Juparana Classico, the Brazilian Juparana Colombo), Juparana India brings a similarly flowing migmatitic banded structure with the characteristic warm creamy-pink ground tone — the Indian counterpart to the Brazilian Juparana family. Against more expressive Brazilian migmatites such as Belorizonte (pink with dramatic bands) or Tropical Black (black with orange rust-red streaks), Juparana India remains calmer and creamier in its slab image — a stone for architects seeking warm elegance with restrained movement. For architectural projects with a warm, natural atmosphere — modern kitchens, hotel lobbies, office façades, floor surfaces in prestige public spaces, pool areas and external façades — Juparana India is a very widespread and readily available choice in the middle segment of the Indian migmatite family.

In stock

Current availability from our warehouse.

184 slabs in stock · plus 46 blocks

Thicknesses: 0.8–4 cm · Finishes: Polished, Sandblasted + satin-honed, Flamed + brushed once · Available as: Slabs, Skirting, Paving slabs, Tiles and flooring slabs

Updated daily from our live stock.

Loading slab images…

Technical data

Guide values for the stone type, taken from manufacturer and test reports. Natural stone is a natural product — individual batches and slabs can differ. For critical applications, request slab-specific test data.

Rohdichte 2.630 kg/m³

Druckfestigkeit 135,0 MPa

Biegezugfestigkeit 7,4 MPa

Wasseraufnahme 0,18 %

Frostbeständig Ja

Säurebeständig Ja

Suitability by application

Finishes

Juparana India is available in a range of finishes. The finish affects appearance, feel and the care it needs.

Polished

Polishing is the most classic finish in the hard stone segment — a mirror-smooth, high-gloss surface with the highest possible colour intensity and maximum depth effect in the mineral structure. As an acid-resistant silicate stone, polished granite is easy to care for and the first choice for kitchen worktops, wall claddings and prestigious exposed surfaces.

Sandblasted + satin-honed

The surface is roughened by sandblasting and then brushed — this creates a level surface with a softer feel than sandblasted alone. The colour appears restrained and the texture is slip-resistant. For demanding outdoor applications in which secure footing is to be combined with a finer tactile quality.

Flamed + brushed once

The surface is roughened by heat and brushed once to smooth sharp-edged mineral residues and remove loose material. The feel is somewhat gentler than purely flamed, it remains slip-resistant, and the colour is less intense than polished. The standard choice for outdoor areas, terraces and heavily used floor areas.

Care & fabrication

As an Indian migmatite, Juparana India is a robust hard stone with a low water absorption (0.18 %), DNSA-confirmed acid resistance and frost resistance and a Mohs hardness of 6-7. Wine, lemon juice, vinegar, cola, sanitary cleaners or descalers leave no etch marks as they would on marble or limestone — the stone is considerably easier to care for and well suited to intensive everyday use.

For interior applications we recommend sealing on a silane or polysiloxane base at first installation. On polished surfaces, depending on use, 5-10 years can pass between sealer refreshes; on heavily used kitchen worktops or external applications, check every 2-3 years. Sealing protects against deep penetration of oil, grease and pigments — on the lighter creamy-pink areas discolouration would otherwise show up visibly, which with Juparana India is particularly important because of the warm light ground tone.

Daily care is carried out with a pH-neutral natural stone cleaner and a soft cloth or microfibre mop. Clear warm water is usually enough. Acidic cleaners are fundamentally unproblematic, but should nevertheless not be used, because they can attack the sealer. The surface finishes currently in stock are listed in the »Finishes« block further down.

For kitchen worktops, Juparana India is very well suited: cut- and scratch-resistant, insensitive to heat (hot pots and pans can be set down directly for short periods, but prolonged heat exposure above 200 °C should still be avoided), DNSA-confirmed acid-resistant and with good stain repellency. The expressive, multi-layered surface conceals small marks of use astonishingly well. The surface finishes currently in stock are listed in the »Finishes« block further down. With the low water absorption (0.18 %) the stone is fully weather-stable — excellently suited to external façades, terraces, stairs and pool areas.

For pool surrounds, external terraces and fountain surrounds, a slip-resistant textured surface is mandatory — on polished external surfaces there is a high risk of slipping when wet. In areas with frequent salt contact (road salt, pool chlorine) we recommend an additional annual refresh of the sealer.

Frequently asked questions

What is Juparana India geologically — granite or migmatite?

Geologically, Juparana India is a Precambrian migmatite, a highly metamorphic mixed rock on the boundary between gneiss and incipient melting — DNSA-confirmed under entry #1760. In international trade and at ROSSITTIS the stone is listed in the granite family, because it offers the same technical properties (hardness, acid resistance, frost resistance) and is worked in a similar way. The characteristically flowing migmatitic banded structure is a typical mark of the migmatite character.

What does 'Juparana' mean?

Juparana is an international trade designation for a whole family of commercially widespread migmatitic stones with a creamy ground mass and a dynamic migmatitic vein pattern — the name originally comes from Brazil (Juparana Classico from Espírito Santo) and was later adapted for similar-looking stones from India, Brazil and other countries. Juparana India is the Indian representative of this trade family, from Karnataka. Other well-known Juparana variants are Juparana Classico (Brazilian) and Juparana Colombo (Indian, Tamil Nadu).

Is Juparana India suitable for a kitchen worktop?

Very well suited. With a Mohs hardness of 6-7, a low water absorption (0.18 %), a compressive strength of 135 MPa and DNSA-confirmed acid resistance, Juparana India is cut-, scratch- and heat-resistant and does not absorb wine, lemon or vinegar acids. The expressive creamy-pink surface with its flowing bands conceals small marks of use astonishingly well. For a kitchen worktop with a warm, elegant material effect and full everyday suitability, the stone is a very fitting choice.

Which finishes are available for Juparana India?

The surface finishes currently in stock are listed in the »Finishes« block on this page.

Where does Juparana India come from?

Juparana India comes from the quarries around Doddamudvadi near Kanakapura in the southern Indian state of Karnataka — one of the world's most productive natural stone regions in India. The stone is DNSA-confirmed under entry #1760 with the trade aliases INDIAN JUPARANA, JUPARANA INDIA and PINK CORAL. Important: further Indian stones with a 'Juparana' reference exist — Juparana Colombo (Tamil Nadu) and Vyara Light (Tamil Nadu) belong to the wider Juparana trade family but are independent stones from other quarries, not identical with Juparana India.

How do I clean and care for Juparana India?

As a migmatite, Juparana India is very easy to care for: daily care with a pH-neutral natural stone cleaner and a microfibre cloth is enough. We recommend sealing at first installation; for interior applications a refresh interval of 5-10 years depending on use, on heavily used kitchen worktops or outdoors check every 2-3 years. Acidic cleaners are fundamentally unproblematic, but should nevertheless not be used. On polished surfaces, drying off with a polishing microfibre cloth after damp mopping is advisable.

Is Juparana India frost-resistant and suitable for outdoor use?

Yes, very well suited. DNSA explicitly confirms frost resistance AND the outdoor durability of the polish — a rare combination that many stones do not meet. With the low water absorption of 0.18 % the stone is fully weather-stable. For external applications even a polished surface can be used without the gloss being lost quickly. For pool and terrace we recommend flamed or sandblasted for the sake of slip resistance.

What does Juparana India cost?

The price depends on the batch, thickness, surface finish and fabrication — with natural stone there is no serious flat rate per square metre. Business customers see prices once their B2B account is activated; private customers receive a complete quote through a fabricator near them.