Anröchter Dolomit is a yellow-green to beige-grey German limestone with a matt, traditional building-stone effect. At ROSSITTIS it is used for façades, paving, stairs and external works wherever a classic German building material with regional character is called for.
Other trade names: Anrochter Limestone, Anroechter Dolomit, Anroechter Gruen Sandstein, Anroechter Gruenstein, Anroechter Grun, Anroechter Kalkstein, Anröchter Grünsandstein, Fossil Green, German Green Limestone, Jura Green, Jurassic Green, grüner Sandstein
About Anröchter Dolomit
Anröchter Dolomit is one of the defining German building stones for façade and external architecture. Its colouring ranges from yellow-green and beige-grey through to muted earthy tones; the pattern appears fine, matt and very constructional. It is precisely this restraint that makes the stone so strong: it does not dominate, but gives architecture substance and regional credibility. For façades, plinths, paving and stairs that is a very classic profile.
The stone comes from Germany, from Anröchte in North Rhine-Westphalia. Despite the historical trade designation, petrographically it is a slightly dolomitised limestone. On the market, however, Anröchter Dolomit is read above all as a regional building stone. Compared with Portuguese limestones it appears more traditional and more porous; compared with granite, markedly softer and more craftsmanlike. That is frequently exactly what is wanted.
Technically, Anröchter Dolomit sits at around 2,550 kg/m³ bulk density, about 2.3 to 4.0 % water absorption, approximately 85 MPa compressive strength and around 19.5 to 26.7 MPa flexural strength. Frost resistance is given, while at the same time the open porosity is high and the stone remains acid-sensitive. It is also important that a true high-gloss polish is not its route. Anröchter Dolomit lives on finely honed, matt, building-stone-like surfaces. For kitchen worktops or other acid-exposed areas the stone is not a good standard choice.
The surface finishes currently held in stock are listed in the »Finishes« block further down. At ROSSITTIS, Anröchter Dolomit is available as an unsized slab, in tiles, as tread and riser, paving, window sill, skirting, façade element and for external or contract construction projects.
The honest assessment: this is not a stone for high-gloss luxury or low-maintenance kitchens. Its strength lies in the traditional German building-stone effect and in good external usability despite the more open structure. Where regional identity and building-stone character count, Anröchter Dolomit is very strong.
In stock
Current availability from our warehouse.
Loading slab images…
Technical data
Guide values for the stone type, taken from manufacturer and test reports. Natural stone is a natural product — individual batches and slabs can differ. For critical applications, request slab-specific test data.
Anröchter Dolomit is available in a range of finishes. The finish affects appearance, feel and the care it needs.
Geschliffen C220
Mattes Erscheinungsbild durch feinen Schliff mit Körnung C220 — die ebene Oberfläche wirkt ruhig mit etwas intensiverer Farbwirkung als C120, leichte Schleifspuren möglich. Pflegeintensiver als poliert, dafür kratzfester und matt-elegant — beliebte Wahl für moderne Bodenflächen und Wandverkleidungen.
Geschliffen C400
Mattes Erscheinungsbild durch feinen Schliff mit Körnung C400 — die ebene Oberfläche zeigt eine deutliche Farbintensität bei minimal sichtbaren Schleifspuren (Feinschliff). Etwas pflegeintensiver als poliert, aber visuell sehr nahe an der polierten Tiefe — eine elegante Mattalternative für anspruchsvolle Sichtflächen.
Care & fabrication
On floors, façades and particularly in moisture-exposed areas, Anröchter Dolomit should be carefully planned and, where necessary, sealed. This makes cleaning and maintenance easier and reduces the take-up of dirt and moisture.
For cleaning and maintenance, pH-neutral natural stone cleaners, water and soft brushes or cloths are suitable. Acidic cleaners, descalers and aggressive cement haze removers are unsuitable for this limestone.
Because of the higher porosity, organic soiling and moisture exposure should not be underestimated. On horizontal external surfaces in particular, regular removal of dirt is sensible.
In winter, functioning drainage and constructionally correct junctions matter more than chemistry. Despite its frost resistance, the stone demands clean execution.
Frequently asked questions
Is Anröchter Dolomit suitable for a kitchen?
Only with considerable restraint. With about 2.3 to 4.0 % water absorption, high porosity and clear acid sensitivity, Anröchter Dolomit is not an ideal stone for a kitchen worktop.
Which finishes are available for Anröchter Dolomit?
The surface finishes currently held in stock are listed in the »Finishes« block on this page. A high-gloss polish is not part of the actual material logic of this stone.
Where does Anröchter Dolomit come from?
Anröchter Dolomit comes from Anröchte in North Rhine-Westphalia and is one of the best-known regional German building stones.
How do I clean Anröchter Dolomit correctly?
For cleaning and maintenance you should use pH-neutral natural stone cleaners and consistently avoid acidic products. On external surfaces, regular removal of dirt helps particularly.
Is Anröchter Dolomit frost-resistant?
Yes. The stone is regarded as frost-resistant and is very frequently used in Germany for façades, paving and external works.
Anröchter Dolomit or limestone from Portugal?
Anröchter Dolomit appears more regional, more porous and more traditional. Portuguese limestones often appear more homogeneous and somewhat more international in expression.